无码av高潮喷水无码专区线,欧美伦费免费全部午夜最新,丰满少妇在线观看网站,gv天堂gv无码男同在线观看

Universal grinder often need maintenance replacement parts are there?
   Because universal mill is widely used in all walks of life, so the domestic and foreign research and development of universal mill are very seriously.
  At present, China universal grinder Market has great potential, but the real vitality of the fist product is not much, still need to provide researchers and manufacturers of the invention, not only can solve practical problems is developed, and has universal pulverizer with high efficiency, to add up the technical gap in China and the world
  Universal grinder is composed of three parts, auxiliary machine, electric control box, compact design, reasonable structure, with a winnowing, non - sieve mesh. The machine is equipped with a classification mechanism, can make a complete crushing, grading. Negative pressure conveying the crushing cavity everfount time heat generated by the discharge, crushing it is also suitable for heat-sensitive materials. Universal mill of wide range of application, the production process of continuous, discharge size adjustable; can handle such as: chemical products, food, medicines, cosmetics, dyes, resins, shell fabric and other materials crushing and grading, this machine has reached the international advanced level.
  Universal mill operation taboos:
  1, the output shaft in E, namely the belt wheel e, avoid using a hammer blow, the damaged parts.
  2, is strictly prohibited in shutdown handwheel handle.
  Lubricating oil by 3, the governor, by using alkaline zinc high antifriction hydraulic oil, gear reducer for universal lubricating oil, must not use other machines without replacement.
  4, after 3000 hours of use, should be replaced with new oil, then uses 500 hours after the second oil, then use later changed every 1000 hours.
  Universal grinder often need maintenance replacement parts:
  Repair and replacement of a screen. The screen is made of thin steel or iron sheet punching. When the screen appears wearing or foreign matter breakdown, if damage area is not large, repair method of usable riveting filling or soldering; if damaged, should be replaced with new sieve. Install screen when, should make mesh belt burr face, smooth outwards, screen and screen frame to fit closely. Ring sieve piece when in installation, the overlap layer stubbles should follow the direction of rotation, to prevent sticking material in the lap joint.
  Two, bearing lubrication and replacement. Universal mill works 300 hours a day, should clean the bearing. If the bearing lubrication oil, add new oil to fill the void 1/3 bearing seat is appropriate, not more than 1/2 before operation, only will often cover type oil cup cover is screwed tightly touch can. When the universal grinder bearing severe wear or damage, should be replaced in time, and pay attention to strengthening the lubrication; the use of tapered roller bearings, should pay attention to check the bearing axial spacing, and keep it for 0.2-0.4 mm, if not, can increase or decrease the bearing cover at the pad of paper to adjust.
  The replacement of three tooth and claw, and the hammer. The crushing components, grinding tooth claw hammer is vulnerable and universal mill of feed, also affect the quality and the productivity of main components of crushing, grinding tooth claw and hammer of wear should be promptly replaced. Tooth and claw type universal pulverizer replacement tooth claw, should first disc pull out. Pull out before, first round nut open disc on the back of the lock plate, with a hook wrench and unscrew the nut, with special pull disc pull out. In order to ensure the rotor balance, change gear should pay attention to the complete change, change should be done after the static balance test, in order to make universal pulverizer is stable. Tooth claw assembly must tighten the nuts, and note don't short-shipped spring washers. Change gear should choose qualified parts, single tooth claw weight should be not more than 1.0-1.5 grams.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116

主站蜘蛛池模板: 精品亚洲国产成人小电影 | 国产成人精品福利网站| 日韩精品人妻无码久久影院| 久久不见久久见www免费视频| 丝袜美腿一区二区三区| 99在线精品一区二区三区| 国产精品呻吟久久人妻无吗| 午夜精品国产精品大乳美女 | 国产av国片精品一区二区| 亚洲成a∨人片在无码2023| 国产做a爰片久久毛片a片| 成人超碰| 久久精品国产999久久久| 精品少妇爆乳无码aⅴ区| 国产精品人成视频免费999| 狠狠色丁香婷婷久久综合蜜芽| 日本强伦姧人妻久久影片| 国产精品久久国产三级国| 精品乱码一区二区三四区视频| 久久人人爽人人爽人人片av高清| 亚洲欧美在线一区中文字幕| 国产无套白浆视频在线观看| 亚洲a成人无m网站在线| www国产精品内射熟女 | 精品久久久久久无码中文野结衣 | 精品国产杨幂在线观看| 亚洲精品无码ma在线观看| av无码国产精品麻豆| 欧美gv在线观看| 67194成在线观看免费| 丝袜足控一区二区三区| 永久免费无码av在线网站| 国产亚洲精品久久久久久国| 无遮挡激情视频国产在线观看| 久久婷婷五月综合色奶水99啪| 午夜成人1000部免费视频| 午夜少妇性开放影院| 老熟女毛茸茸浓毛| 国产亚洲精品久久久久动漫| www一区二区www免费| 18禁成人???猛撞韩漫|